How To Extend Kitchen Cabinets To The Ceiling? -Best Guide

Introduction

If you’re looking for a way to make your kitchen look bigger and more spacious, extending your cabinets to the ceiling is a great way to do it. It’s a relatively easy and cost-effective way to add storage and open your kitchen space. In this article, we’ll walk you through the steps of extending your kitchen cabinets to the ceiling, from measuring and cutting to installation and finishing. We’ll also discuss the necessary materials and tools to complete the job. So, let’s get started and learn how to extend your kitchen cabinets to the ceiling!

Remove any molding or trim along the top of the cabinets.

To extend the cabinets to the ceiling, you’ll first need to remove any molding or trim along the top of the cabinets. This will help you get an accurate measurement of the cabinet height.

Measure the Space

Measure the area above the cabinets’ length and height. This will determine how much space you have to work with and how high you can extend the cabinets.

Determine the Height of the Cabinets: Choose a height for the cabinets that will fit in the space and provide enough storage. Consider the height of the people using the cabinets, and make sure the cabinets are not too high or too low.

Cut plywood panels to the appropriate size to fit over the cabinets

You will need a few tools and materials to cut plywood panels to fit in the space above the cabinets. You will need a tape measure, a saw, a straight edge, clamps, and plywood panels.

• Measure the space above the cabinets to determine the size of the plywood panels needed.
• Cut the plywood panels to fit with the saw. Use the straight edge as a guide to ensure the panels are cut straight.
• Clamp the panels in place to ensure they are secure.
• Cut the panels to the desired shape and size with the saw.
• Smooth the edges of the panels with sandpaper to ensure a neat finish.
• Attach the panels to the cabinets with screws or nails.

Attach the blocks to the tops of the cabinets and the ceiling

You will need a few supplies to install blocks along the ceiling and the top of the cabinets. First, you will need blocks, screws, a drill, a level, and a tape measure. Start by measuring the length of the area you want to install the blocks. Then, use the level to ensure the blocks will be even along the ceiling and the cabinets. Mark the spots where you want to install the blocks, then use the drill to pre-drill holes into the wall. Finally, screw the blocks into the wall and check to make sure they are level and secure.

Before the adhesive dries, install the panel above the cabinets

First, make sure the panel is correctly centered over the cabinets. Double-check your measurements and make sure they’re level. Then, use wood glue to attach the panel to the cabinets. Make sure to use a generous amount, but don’t use too much that it will leak out the sides. Once the glue is applied, press the panel onto the cabinets firmly.To guarantee a solid connection, hold it in place for a few seconds. Once the glue has dried, you can add finishing touches, like trim or molding, to complete the look.

The panel should be attached to the blocks after the glue has dried

Once you have attached the panel to the cabinets, you must install blocks on the ceiling to ensure your board is secured and won’t move. Measure the distance between the top of the cabinets and the roof, and make sure you have enough blocks to support the panel’s weight and keep it in place. Choose large blocks to hold the meeting in place securely and use a drill to attach them to the ceiling. Make sure the blocks are evenly spaced, and use screws to secure them in place. You may want to use a few extra screws to be sure that the panel is firmly attached. You are ready to tie the board after the blocks are securely placed.

Put moulding on the ceiling and the top of the panel

 Measure the width of the molding you wish to use. Trim the moulding to the proper length.

Secure the molding along the top of the panel and the ceiling. Use a stud finder to locate the studs in the ceiling and secure the molding with screws. If the molding is not long enough to reach the studs, use wall anchors to secure it.

Fill in gaps between the molding and the ceiling or panel with caulking. Allow the caulking to dry before painting or staining the molding.

Hang the kitchen cabinets from the ceiling using appropriate mounting hardware. Make sure that the cabinets are securely in place before attaching the molding.

Attach the molding to the cabinets. Use a nail gun or a drill to secure the molding to the cabinets. Make sure that the molding is level and secure.

Paint the panel and cabinets the same color

Painting the panels and cabinets the same color is a great way to unify the look of a room. Begin by sanding the surfaces to ensure a smooth finish. Next, apply a coat of primer and let it dry completely. Once the primer is dry, apply two coats of the chosen paint color. When applying many coats, let the paint dry. When the paint is dry, use a brush to apply a coat of clear sealer for added protection. Finally, enjoy the beautiful new look of your panel and cabinets!

FAQs

What do you do with the gap between kitchen cabinets and ceiling?

One way to fill the gap is to install crown molding. Crown molding can be painted to match the cabinets, making the kitchen look more complete and polished.

How do you add height to existing cabinets?

To add height to existing cabinets, you can install taller cabinet doors or risers to the existing cabinet boxes. Another option is to install a taller cabinet base and then add the cabinet doors of your choice.

Can I make my kitchen cabinets taller?

Yes, it is possible to make your kitchen cabinets taller. Depending on the existing cabinets, you may be able to add extra shelves or panels to increase the height. You may also need to replace the entire cabinet to achieve the desired size.

Conclusion

Extending kitchen cabinets to the ceiling is a great way to make the most out of the available space in your kitchen. It takes time and effort to ensure everything is installed correctly and securely, but it’s worth it. It can help make your kitchen look more extensive and organized when done correctly. It’s also a great way to add extra storage space without taking up any additional floor space. You can easily extend your kitchen cabinets to the ceiling with the right tools and supplies.